help needed to set up safe as poss radio set up for my scale plane
#1
Thread Starter
My Feedback: (4)
help needed to set up safe as poss radio set up for my scale plane
guys i just bought a scaled out bud nosen aeronca champ with scale functional main gear, pull pull aileron's it has a Enya 120 4 stroke in it, shes 25 yrs old fabric covering, im looking for a as bullet proff as poss radio set up need advice for : heavy duty servos ?
glow driver system?
dual recvieviers?
dual batteries?
want it as bullet proof as poss set up,
what radio system would you guys run on it? don't wanna go cheap....
thanks in advance
guys in Austin can text advice on set ups to my cell 512-740-2197
glow driver system?
dual recvieviers?
dual batteries?
want it as bullet proof as poss set up,
what radio system would you guys run on it? don't wanna go cheap....
thanks in advance
guys in Austin can text advice on set ups to my cell 512-740-2197
#2
I would keep everything as simple as possible. 1 battery, 1 receiver, skip the onboard ignition. That's just more things that can go wrong. I only fly Futaba radios. Any decent radio system will fly it. Put a heavy duty servo on the elevator. For everything else, I would just go with standard servos.
Looks like the builder was a master craftsman. Superb looking plane.
carl
Looks like the builder was a master craftsman. Superb looking plane.
carl
#3
My Feedback: (1)
Guess I'm on the other side of the fence here. Dual batteries make a lot of sense, glow driver is a good idea, NEW servos and why not dual receivers? Modern radios and batteries are light weight and very reliable. Futuba has a great reputation, so go with their stuff.
Enjoy the plane!
Enjoy the plane!
#4
Congrats on your purchase. The model is a beauty !.
My models of similar size are flown with Hitec equipment, and a single RX and battery pack. I've been using Hitec 645s for the control surfaces.
On my multi-cylinder engines, I have been using Electro Dynamic and McDaniels on board glow units. They may not be a necessity, but they do provide piece of mind. Your model is so nice that it may be a wise investment.
My models of similar size are flown with Hitec equipment, and a single RX and battery pack. I've been using Hitec 645s for the control surfaces.
On my multi-cylinder engines, I have been using Electro Dynamic and McDaniels on board glow units. They may not be a necessity, but they do provide piece of mind. Your model is so nice that it may be a wise investment.