katana 120 with OS160FX set up help (Full Version)

All Forums >> [RC Airplanes] >> 3D Flying!



Message

Kajundave2 -> katana 120 with OS160FX set up help (10/29/2003 3:21 AM)

Ok guys, I picked up My katana 120 today, I will be making some mods, nylon wing bolts, longer hatch area, and move rear servos over the cg. its there anything I am missing ?



bn120 -> RE: katana 120 with OS160FX set up help (10/29/2003 8:07 AM)

fix the webing in the wings just double it up in the verticle direction.

Darin



Stiks -> RE: katana 120 with OS160FX set up help (10/29/2003 10:53 AM)

If it's the GSP Katana check this thread out. Should give you an idea what to change

http://www.rcuniverse.com/forum/GSP_Katana_72%22%25%25%25DETAILED_BUILD_and_3D_FLIGHT_REPORT/m_1050950/tm.htm

[8D]



MAAC -> RE: katana 120 with OS160FX set up help (1/4/2004 11:52 PM)

I have just taken delivery of a Katana S from Creek Hobbies. Are we talking hear and in particular the previous post about the same ARF plane?



bpannier -> RE: katana 120 with OS160FX set up help (1/7/2004 6:48 PM)

MAAC..how does the kit look.Have considered Creek or Chief and do not know which one to get
Planned on using a G26 any comments. Thanks



Rocketman_ -> RE: katana 120 with OS160FX set up help (1/7/2004 8:35 PM)

bpannier,
The Chief Katana 140 has built-up balsa and plywood wings and are covered with a heat-shrink film. The wings can be separated from the fuselage in two pieces for ease of transportation.

MAAC should be able to describe the Creek Katana for you. I have read in these forums that the Creek Katana has a foam wing.



mithrandir -> RE: katana 120 with OS160FX set up help (1/9/2004 7:49 AM)

I have the GSP/CHIEF/CMP Katana... funnest plane I ever had!!!!
go here and check threads forward and back....
http://www.rcuniverse.com/forum/m_1050950/mpage_15/key_katana/tm.htm
I would also add, I made mistake of putting servos on CG, now I have 2 ounces
in the tail in addition to the battery pack! A total of over 5 ounces at tail!
I used an OS 160 with APC 18 x 6 prop. Bisson exhaust and perry pump.
I would estimate it is more power then a YS 140 L.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.2695313