|
RCFREEK -> knife edge pitching (3/28/2004 2:21 PM)
|
I'm flying a zen 50 with an OS 50 SX. The rt thrust was about 2 degs built into the fuse so i didnt alter it. I had to add 2 shims to give it down thrust, which amounts to about 1--1.5 degs. The problem is that when i do a knife edge with left aileron n right rudder, the plane pitches to the belly quite a bit n rolls right simultaneously. Whereas, in knife edge with rt aileron n left rudder it pitches slightly to the belly but doesnt roll. What could be the problem? I've tried mixing but would want to keep it as a last resort. how do i fix it?
|
|
|
|
