CARF REBEL 2m
#353
My Feedback: (53)
My HAVOC SS was about the same price as a Rebel Pro once you buy the fuel tank, pipe, retract with the RB45 and no smoke tank offer so after market for that, and Havoc SS included Pipe, Electron retract with GS200 and fuel and the smoke tanks, on top of that a beautiful paint job..... I build one of each.
The following users liked this post:
Dansy (04-23-2021)
#359
Any Havoc I have ever handled is a brick compared to any CARF moulding. There is no comparison, if as I understand the new Futura models are made in the same factory, they require a back brace too. The fin on a 2.5 Futura from the box weights 100g more than a larger Mephisto Fin, servo, arm and linkage.
#360
My Feedback: (53)
Any Havoc I have ever handled is a brick compared to any CARF moulding. There is no comparison, if as I understand the new Futura models are made in the same factory, they require a back brace too. The fin on a 2.5 Futura from the box weights 100g more than a larger Mephisto Fin, servo, arm and linkage.
#361
Hello, all size Rebel tanks available in CMJETS:
https://cmjets.com/21-pirotti-models
BR from Spain.
Carlos
https://cmjets.com/21-pirotti-models
BR from Spain.
Carlos
Last edited by cmjets; 04-26-2021 at 08:07 AM.
The following users liked this post:
DenisFerrari (12-21-2021)
The following 2 users liked this post by rjpmodel:
chevronflyer (05-13-2021),
DenisFerrari (12-21-2021)
The following users liked this post:
DenisFerrari (12-21-2021)
#370
The following users liked this post:
DenisFerrari (12-21-2021)
#373
#374
No idea what the manual suggests, I’ve set it by eye each time. As always there is a cross over between lift and drag. I’ll see if one of the guys I have set up can measure.
On a lightly loaded airframe you always need lots of drag/lift dump.
On a lightly loaded airframe you always need lots of drag/lift dump.
The following 2 users liked this post by Dave Wilshere:
DenisFerrari (12-21-2021),
paulhat (05-18-2021)