RCU Review: Proboat Shockwave


More On This Product

  • Research Airplanes
  • Research Boats
  • Research Cars
  • Research Helicopters
  • Research Engines & Motors
  • Research Radio Equipment
  •  
     
    Contributed by: Erick Royer | Published: September 2004 | Views: 39425 | email icon Email this Article


    Review by: Erick Royer

    Manufactured By:

    4105 FIELDSTONE ROAD
    CHAMPAIGN, IL 61822
    Tel: (217) 355-9511

    Distributed By:


    4105 FIELDSTONE ROAD
    CHAMPAIGN, IL 61822
    Tel: (800) 338-4639
    www.horizonhobby.com

    CLICK HERE TO VIEW THE SHOCKWAVE AT HORIZONHOBBY.COM





    Click image above to see the
    Shockwave in action!


    Quality
    Ease of assembly
    Performance
    Tracking
    Handling
    Looks
    Price
    Manual

    Dual rates on a basic radio

    Great tuned pipe

    Excellent construction and features

    Great manual and instructions which are very detailed

    In the water in less then 10 minutes from the time I opened the box


    None

    My first impression of the Shockwave was wow. Just sitting there on the hobby shop's counter I knew I just had to own it. Having owned many full sized boats, I was just amazed with the attention to detail that Pro Boat takes when producing these models. I looked it over for about 5 minutes, checked all the linkages, looked over the drive train and motor, took a glance at the outstanding fiber glass job. I looked at the clerk and said "I'll take one to go please". I asked the clerk what else I needed, he said "extra glow plugs and some Blue Thunder fuel". I grabbed just what he said, paid for my goods and left.

    I jumped in my car and pulled out the manual. Overlooked it real quick and read about the break in procedure some other details, then headed straight to the local public lake.

    I got out of my car and said to my friend. "Just think in about 10 minutes we'll have this in the water". My friend, never owning a RTR boat before said "no way". Well I was about to prove him wrong, at least I hoped.


    ARF Name: Shockwave 36 RTR
    Manufacturer: Pro Boat / Horizon Hobby

    Price: $349.95
    Length: 36 in.
    Beam:
    9 in.
    Engine Size:
    .32 water-cooled Marine
    Weight:
    6.25 lbs.
    Speed:
    30 m.p.h.
    Hull Material:
    Fiberglass
    Prop Size:
    1.90x3.0 in.
    Hull Type:
    Deep-V
    Drive System:
    Flex shaft
    Exhaust:
    Tuned pipe
    TX/RX:
    JR Python
    Battery: Alkaline / NiCad

    Also included with boat:

    JR Python AM 2-Z250, 75MHz
    Includes Z250 race servos
    Charging jack
    Servo reversing
    Steering rate adjustor


    Adjustable steering rate is provided via an easily accessible thumb wheel, while a built-in charge jack allows the option of utilizing rechargeable NiCd batteries. (NiCds can even be recharged while remaining in the transmitter!) Of course, the standard features you'd expect from JR are included, such as servo reversing switches, throttle and steering trim knobs, analog voltage meter, and JR's world famous, wrap- around biocurve feel.

    DYNAMITE .32 Marine Inboard
    Type: 2-stroke Marine ABC
    Displacement: 32 cu in
    Bore: 19mm
    Stroke: 18.4mm
    Total Weight: 350g
    RPM Range: 28,000
    HP: 1.18 at 28,000 RPM
    Cylinder Type: ABC
    Carb Type: Rotary
    Cooling: Water Cooled Head
    Starter: Pull

    OK, I'm happy
    Box contents
    Convenient stand


    The assembly portion of this review is going to be as quick as the actual assembly when arriving at the lake. There really was nothing to do but install the rudder and add batteries. That's it.

    The boat looked just as good as it did in the hobby shop. The only difference mine was nice and shiny and never been touched by American hands.


    Stand ready for boat
    First look
    All ready to go

    The boat came with a basic stand. Just another small detail that gives great marks for Pro Boat. This stand is a must to keep the bottom of your boat scratch free. Having viewed the inside of the boat I knew it was going to need a little extra waterproofing. I read some threads on RCU with some good tips. But for the first day, I'll take it pretty easy. This boat has some nice weight to it. Seems like it would take a lot to make it go over.

    The only assembly required
    Open electronic compartment
    JR Python radio


    Attaching the rudder was the only assembly required. I only had to use the manual to learn the break-in procedure for the ABC motor which as in any motor, must be done properly using the correct fuel and procedure.


    Install batteries
    Install batteries
    Install batteries

    The boat is ready for a 4.8 battery pack. However it also comes with a 4 place alkaline battery holder. I used regular alkaline batteries for the first day. When I got home that evening I replaced the RX with a JR 4.8 NiCad pack. The transmitter required 8 AA's. Again I used alkaline's, however when I got home that evening I replaced them with rechargeable AA battery's from Radio Shack. The JR Python does have a built in charge jack that also works with a standard JR charger to charge the batteries in the radio. Again, another thumbs up for Pro Boat and JR.


    Ready to roll
    Very detailed manual
    Fill up with fuel


    Just put the batteries in and you ready to go. The manual is very detailed and provides more information then expected. Blue Thunder 20 is the recommended fuel to use. Filling is very easy with plenty of room. Time from opening the box to first pull, 8 minutes and 30 seconds.


    First couple runs with glow
    First run
    Engine broke in, ready to go

    For the first couple runs I kept the glow igniter attached to decrease the chance of the engine quitting. Unlike a RTR car you can't just walk up to a boat if it dies. Now if I could walk on water, that would be different. It's not bad for the plug either. After about 2 tanks of break in it was time to put her to the test.



    Underway Shots






    Click image above to see the
    Shockwave in action!

    You'll be happy to know that the boat ran like a champ. Since the first crank it's given me nothing but pleasure. The boat over exceeded my expectations. Although I did not have a machine to clock it, I would say that it did every bit of 30 MPH as it says it can do. The boat handled very well too. This boat is supposed to perform a full turn in only 12' feet at full speed. I have yet to find out, but I'm looking forward to it. It sure seems like it has the capability.

    The quality is superb. There was really nothing missed. The built in trim tabs I still have yet to play with. The boat only cavitated a couple times when transitioning from high speed to low speed and back to high. However the recovery from cavitation is very quick and very easy. This means that the boat has a great center of gravity.

    The engine and drive train are just perfect. Again nothing missed in the way of attention to detail. All of the linkages on the drive train are all high quality and machined very well.

    POSING TIME


    The Dynamite .32 engine flips on the first pull, but I noticed that it likes to be sloppy wet to start right up.

    Everything else on the boat was just great. I did notice that there were a few spots that water could come into the boat had it gone over. There are some good threads on RCU that discuss this and I will probably follow some of their suggestions. I didn't expect this boat, or any boat for that matter to be water tight. After all this is an RC boat, not a RC submarine.

    The quality of the fiberglass and paint were just fantastic. The trim scheme looked just like an offshore racing boat scheme. It's very up to date as far as hot trim schemes go. This great trim scheme was all due to the quality of the great molding job. You can't have a great scheme without a great foundation. Well this boat has one.

    I was really surprised with the JR Python radio system. I thought it was just going to be a basic radio. However it had several features. Most important there were dual rates for steering. This is very important for a new boat that has not been waterproofed. Although JR might consider this their basic model, it really is nice radio that is also very comfortable to hold.


    I've been hearing from many that magazine and RCU reviews are just becoming to good to be true and speculation that some of the products reviewed must be coming from the inside. Well after buying this boat I feel like I may have given an almost perfect review and may seem to good to be true. Well, it is. I really can't find a single thing wrong with this boat. Let's also not forget that technology is also getting better. Not just for this boat, but for everything out there. You can see plenty of technology built into this boat.

    Now If your looking for a complaint from this review then I will give you one. I was not thrilled that the RTR boat did not come with recharable batteries. But for only $350 you get a heck of a lot of boat and goodies. I also bought the boat knowing that batteries were not included with a big smile on my face, so there was no shock factor.

    Now to top it off you get a great looking, well manufactured boat that tracks perfectly, corners on dime and capable of speeds of over 30 mph.

    My final words. If your looking for v-hull with a 300-400 price range, you found it.


    noid was here
    Manufactured By:

    4105 FIELDSTONE ROAD
    CHAMPAIGN, IL 61822
    Tel: (217) 355-9511

    Distributed By:


    4105 FIELDSTONE ROAD
    CHAMPAIGN, IL 61822
    Tel: (800) 338-4639
    www.horizonhobby.com

    Comments on RCU Review: Proboat Shockwave

    There are no comments

    The comments, observations and conclusions made in this review are solely with respect to the particular item the editor reviewed and may not apply generally to similar products by the manufacturer. We cannot be responsible for any manufacturer defects in workmanship or other deficiencies in products like the one featured in the review.

    EMAIL THIS ARTICLE OR CHECK OUT THESE OTHER GREAT REVIEWS!
     
    PhotoManufacturerProductSummaryReviewed
    Redcat RacingAftershock 3.5 RTRShort course truck racing seems to be the new big thing in radio controlled racing. I can understand why. The excitement of "...11/08/2009
    AeroWorks50cc Extra 300 ARF-QB Aeroworks continues to come out with new designs in their QB series. In case you haven't heard yet, the QB stands for Quick B...11/08/2009
    Redcat RacingBackdraft 8E RTRI really like the Redcat Racing Backdraft 8E RTR. I know I had some problems with breaking the wing mount and a couple other ...11/01/2009
    TraxxasSummit RTRTraxxas introduces the RC world to remotely controlled differential lockers with the Summit. Is it true? A cross between a ro...10/25/2009
    SeagullDecathlon ARF 120Since the maiden flight I have flown the Decathlon several times in a variety of weather and wind conditions (including once,...10/17/2009
    TikGames / Creat StudiosSmash Cars PlayStation 3 GameI asked my two boys to rate this game. On a scale of 1 through 10, one of them said 8 and the other said 10. Those are really...10/04/2009
    Hangar 9Saratoga ARF on Floats!The design team at Hangar 9 decided they wanted a different look, drawing back to an early years racer, so they created a mid...10/04/2009
    ROAR2009 Fuel Off Road Nationals The ROAR Nationals are comprised of 5 different races that are held at different locations around the US. The 2009 Fuel Off R...09/28/2009
    Top FliteP-47D Thunderbolt ARFThe maiden flight was taken at a Fun-Fly I was invited to at the TCRC field in Jordan, MN. Now, I have a rule when it comes t...09/05/2009
    Exceed-RCMad Beast RTR I can remember as a boy loving to watch the monster trucks. I got so excited as they roared over the crushed cars, pulled whe...09/05/2009
    NutechThunderbolt II 1/5th scale RTR 4WDSo, here we are again, another year, another large scale 4wd buggy to talk about. For those of you who missed my independent ...08/25/2009
    The Wings Maker1/4 Scale Super CubThe Wings Maker is a new version of a familiar company - The World Models. With a few revamped designs and a different brand ...08/23/2009
    Z-Car USAZMXT - 8 RTR TruggyThere is no fooling anyone when it comes to a very solid, fun to drive, race bred and fed Nitro Truggy. The RTR version of th...07/28/2009
    AquaCraftMiss Vegas DeuceThe Miss Vegas has great handling characteristics and can hold it's own in moderate chop. I was impressed how it handles in s...07/28/2009
    AssociatedRC8T RS RTRAfter completing a couple of laps, the adrenaline was pumping through my veins.......07/19/2009
     

      Return to Magazine Homepage






     
    RCUniverse is a service of Kaango, LLC dba RC Universe. Copyright © 2001-2009.  Privacy Policy
     
    GET FREE RC CONTENT FOR YOUR WEBSITE

    Search | Marketplace | Event Central | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

    Photo Gallery | Instructor Search | Field|Track|Marina Search | RCU Videos | RCU Youtube Channel | | RCU Twitter!

    Member Locator | Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

    Products Videos WattFlyer.com RC Classifieds

    RCU1 | 38.107.191.81 | 0 | 1 | 10:40:42 AM EST | YC