New Fei Bao Swordfish Sport Jet
#1
Thread Starter
New Fei Bao Swordfish Sport Jet
Hi All,
Thought some of you might be interested in this new sport jet from Fei Bao. I have had the privilege of assembling and test flying the first sample of this 3.1metre (122") long model, and wanted to post a few photos and a link to one of the flights we made last Saturday, during the first flight session.
The Swordfish is of course all moulded and weighs just under 18Kg without fuel, fitted with a JetCat P180-Rx turbine. It flies extremely well, and coped without problems with the blustery wind we had to contend with, as well as the relatively restricted airspace we had at the flying site. The only minor issue with the flight shown is that I caught the flap switch during the landing approach so touched down without flap, meaning the landing was a lot faster than it should have been.
Photos and video were kindly taken by my good friend Bob Petrie.
https://www.youtube.com/watch?v=locV...ature=youtu.be
Colin
Thought some of you might be interested in this new sport jet from Fei Bao. I have had the privilege of assembling and test flying the first sample of this 3.1metre (122") long model, and wanted to post a few photos and a link to one of the flights we made last Saturday, during the first flight session.
The Swordfish is of course all moulded and weighs just under 18Kg without fuel, fitted with a JetCat P180-Rx turbine. It flies extremely well, and coped without problems with the blustery wind we had to contend with, as well as the relatively restricted airspace we had at the flying site. The only minor issue with the flight shown is that I caught the flap switch during the landing approach so touched down without flap, meaning the landing was a lot faster than it should have been.
Photos and video were kindly taken by my good friend Bob Petrie.
https://www.youtube.com/watch?v=locV...ature=youtu.be
Colin
#3
Member
Join Date: Oct 2008
Location: Zhongshan, CHINA
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
#9
Many things affect this, fuselage area, shape in front of the balance point. This fuselage will produce less lift than the many Hawk clones, but 10 % is a good starting point on jets, up to 12%
#12
Thread Starter
Hi Rich,
Please find attached a few photos as requested, there will be a great deal more in an article on the model in the next RC Jet International magazine. The fuselage splits for transport like many models, but this one has been thought through, it takes less than 2 minutes to reassemble the fuselage, as the access to the allen screws used is easy, and the tailpipe mounts to the rear fuselage, even though it protrudes into the front section.
Colin
Please find attached a few photos as requested, there will be a great deal more in an article on the model in the next RC Jet International magazine. The fuselage splits for transport like many models, but this one has been thought through, it takes less than 2 minutes to reassemble the fuselage, as the access to the allen screws used is easy, and the tailpipe mounts to the rear fuselage, even though it protrudes into the front section.
Colin
#15
Thread Starter
Yes, I was concerned about the positioning of the tanks when I assembled the model, but found that in flight this did not seem to bother the model much. Over the course of an 8 minute flight only 1 click of trim was needed to keep the model perfectly in trim, and the stall did not seem to vary between full and low fuel loads.
Possibly the large tailplane area helped with this!
Colin
Possibly the large tailplane area helped with this!
Colin
#16
On this style of airframe trimming during the flight is poor, I can't see an immediate reason why they could not have designed them further back. Big tail and a gyro might well fully sort it, but it's still strange to go to all that trouble and miss the basics!
There are so many new designs being released that are compromised, huge cost of making moulds and the basics established years ago ignored!
There are so many new designs being released that are compromised, huge cost of making moulds and the basics established years ago ignored!
#17
Hello to all, The Demo Swordfish that will be flown at Florida Jets is almost done and the large modifications that we have done are great. New Fuel tanks with integrated 30oz smoke tank, new intake design and ducting. The canopy area was modified to look much better with Colins recommendations along with our suggestions the Jet really looks sharp. Will have video this week and will post link asap. We will be running an amazing deal on this plane starting the week of Florida Jets. Stay tuned for the sale of a lifetime.
Last edited by HOPJets; 03-07-2017 at 06:19 AM.
#21
We will have the full line up of Fei Bao Aircraft at Florida Jets ready to fly. I personally have the large Dolphin and the Swordfish Flies exactly the same just faster and in the slow speed regime slower. The plane is very precise and has no bad habits. I am working on the manual of the plane as we speak to have setup a breeze and real numbers for throws, CG and final setup. below i will attach a few pictures of my Dolphin so you can see how perfect all these planes fly.
#22
House of Power Hobbies would like to introduce the new Fei Bao Swordfish. This amazing flying aircraft can be seen flown at the link below
https://youtu.be/1fVVGRHUfso
Specifications.
Turbine - 36lb thrust to 50lb thrust
Length - 122 inches (3 meter)
Wing span - 101 inches
As the Exclusive dealers for this aircraft we are offering for 1 week only Florida Jets Special of $3,895.
Includes - Landing Gear, Fuel Tanks, Pipe, all hardware to complete kit. And for this week only we will GIVE YOU ALL SERVOS FOR THIS PLANE FOR FREE!!!!
8 Savox 2270 ( 440 oz of Torque, Brushless, High Voltage ). You can place your order by emailing [email protected]
All color Schemes offered can be seen on Fei Bao's website. www.fbjets.com
https://youtu.be/1fVVGRHUfso
Specifications.
Turbine - 36lb thrust to 50lb thrust
Length - 122 inches (3 meter)
Wing span - 101 inches
As the Exclusive dealers for this aircraft we are offering for 1 week only Florida Jets Special of $3,895.
Includes - Landing Gear, Fuel Tanks, Pipe, all hardware to complete kit. And for this week only we will GIVE YOU ALL SERVOS FOR THIS PLANE FOR FREE!!!!
8 Savox 2270 ( 440 oz of Torque, Brushless, High Voltage ). You can place your order by emailing [email protected]
All color Schemes offered can be seen on Fei Bao's website. www.fbjets.com